MAX Trailer MAX100
Please note that the vehicle shown may differ from the actual offer in terms of colour and accessories. For further information, please contact us.
- Chassis number 110366
- Reference MAX100-N-3A-9.30-FTR
- Number of axles 3
- Condition New
- Year of manufacture 2026
- Colour Colour selectable
- Availability 06/2026
- Steering Type Friction
The most important documents
Detailed information
Technical data
Weights
| Technical value 80 km/h | |
|---|---|
| King pin load | 18000 kg |
| Axle load | 31500 kg |
| Gross weight | 49500 kg |
| Tare weight +- 3% | 13052 kg |
| Payload | 36448 kg |
Dimensions
| Fifth wheel height loaded | 1150 mm |
| Gooseneck length | 3 800 mm |
| Turning circle reversing | 2 100 mm |
| Loading platform length | 9 300 mm |
| Extendable by | 4 100 mm |
| Wheelbase | 1 360 mm |
| Loading height at max. load | 860 mm |
| Total width | 2 540 mm |
| Suspension stroke | -55/ +145 mm |
Gooseneck
1 x Gooseneck : MAX-3.800-750-10° (DSR 2100/ASH 1150)
Gooseneck with rear chamfered by ca. 750 mm x 10°.
3 pairs of lashing rings (LC 5 000 daN).
Hardwood cover thickness 30 mm.
Loading deck
Loading platform
1 x Loading platform : MAX100-N-3A-9.30-17.5-2.54-FTR
Loading platform in extendable version.
6 pairs of lashing rings in the loading platform, hinged outwards (LC 5 000 daN).
3 pairs of lashing rings in the loading platform, hinged outwards (LC 10 000 daN).
1 pair of lashing rings in front in the firm part the loading platform (LC 10 000 daN).
Cutouts in the border frame of the loading area for hooking in tension belts (LC 2 000 daN).
Hardwood cover thickness 48 mm, above the axles chequer plate.
- On the right and left on the gooseneck and at the rear of the trailer one holder for the warning boards with socket.
- Reflectors (red - yellow) according to the EU regulation at the rear of the trailer.
- Holder for one beacon light at the rear of the trailer.
- Cable control for the hydraulic rear.
- Yellow reflective tape according to the EU regulation over the entire length, on the extension and at the rear.
- Electrically operated hydraulic pump at the rear under the loading platform. (± 45 kg)
- Sign 1 900 x 250 mm CONVOI EXCEPTIONNEL at the rear of the trailer.
- 4 warning boards ± 423 x 423 mm extendable by ± 400 mm with 1 LED position lights (± 25 kg).
- On the warning boards a holder to put a flashing beacon.
- Speed sticker 60, 80 & 90 km/h at the rear.
- Acoustic warning signal when reversing.
-
Radio remote control:
- Operation of lifting/lowering the hydraulic overhang
- Operation of hydraulically extendable loading table - 4 pairs of WADER containerpockets in the loading platform for 1 x 20', 1 x 30' or 1 x 40' containers. (± 40 kg)
- 6 pairs of pockets for stakes ca. 100 x 50 mm in the outer frame of the loading platform (± 18kg).
- Galvanised outriggers, extendable up to ± 230 mm per side (± 262 kg).
- Galvanised storage across under the loading platform. (± 150kg)
- One removable, galvanised sliding bolster, ± 250 mm wide (± 127 kg).
-
1 pair of ALU-deck filling sections ± 2 160 x 620 x 120 mm (for an extension of 2 000 mm) to bridge the gaps of the extended loading area.
Load capacity a pair ± 10 000 kg.
Tare weight a piece ± 52 kg.
(± 104 kg) - Two lockable tool-box INOX 600 X 350 X 600 under the loading platform in driving direction on the left and right side. (± 54kg)
- 1 LED reversing lamp left and right in front of the first axle.
Ramps
Hydraulic loading ramps
1 x FTR : FTR-LB
Loading area at the rear with perforated steel plate can be lowered hydraulically over a length of ± 2 120 mm.
Vehicle rear with integrated loading table that can be hydraulically extended by 1 500 mm, incl. 2 ramp compartments and ramp support.
The extension cannot be loaded.
Load capacity of the rear section retracted and raised: 6,000 kg.
The rear of the vehicle can be driven on with an axle load of 8 tonnes.
''Not suitable for tracked machines''
-
1 pair of alu ramps VFR 105 ca. 1300x390 x 105 mm (l x w x h)
Capacity per ramp for :
bogie 2 axles with load distribution 40 % to 60 %
by axle distance 1.5 meter : 7650 daN (Kp)
by axle distance 2.0 meter : 7650 daN (Kp)
single axle 5740 daN (Kp)
max. admissible uphill: 30 % (16.5°)
Weight per ramp approx. 24 kg (± 48kg)
Accessories
1 x Accessory
MAX100-Accessory
- Manual and description on USB stick .
- Cable for the the electric-hydraulic pump and/or electric winch (35 mm², 3.5 m length, max. 160 A) between the semi-trailer and the truck with socket (ANDERSON-ANDERSON).
- Camera cable Brigade (Ref. VBV-L430 ) to be fitted inside of the energy chain.
- Delivery from a trailer to factory Lentzweiler.
Request vehicle
We look forward to receiving your enquiry. We will respond as quickly as possible.
- Chassis number 110366
- Reference MAX100-N-3A-9.30-FTR
- Number of axles 3
- Condition New
- Year of manufacture 2026
- Colour Colour selectable
- Availability 06/2026
- Price On request
-
Location
SpecialTrailers24
Z.A.E.R. Op der Sang
16, Op der Bréimicht
9779 Lentzweiler
Luxembourg - AdId 000133
- Steering Type Friction
