MAX Trailer MAX710
Please note that the vehicle shown may differ from the actual offer in terms of colour and accessories. For further information, please contact us.
- Chassis number 110240
- Reference MAX710-Z-8(3+5)-V-30-ATX-A-7.15-(330)-19.5-1.36-2.85-PA
- Number of axles 8
- Condition New
- Year of manufacture 2025
- Colour Colour selectable
- Availability 02/2026
- Steering Type Hydraulic
The most important documents
Detailed information
Technical data
Weights
| Technical value 80 km/h | |
|---|---|
| King pin load | 37000 kg |
| Gross weight | 148200 kg |
| Tare weight +- 3% | 35285 kg |
| Payload | 112915 kg |
| Axle load front bogie | 41700 kg |
| Axle load rear bogie | 69500 kg |
Dimensions
| Fifth wheel height loaded | 1300->1400 mm |
| Loading platform length | 7 150 mm |
| Extendable by | 4400 |
| Bogie width | 2 850 mm |
| Wheelbase | 1 360 mm |
| Turning circle reversing | 2 700 mm |
| Bogie length | 6840 |
Gooseneck
1 x Gooseneck
Gooseneck hydraulic lift- and lowerable and detachable.
Length ± 3 650 mm.
2 pairs of lashing rings foldable outwards (LC 5000 daN)
2 pairs of lashing rings on the gooseneck (LC 10 600daN)
1 pair of lashing rings on the centre section of the gooseneck (LC 10 600 daN)
For use of trucks: 6 x 4 and 8 x 4
- Load manometers at the gooseneck for the axle load on the front and the rear bogie incl. axle load graph.
- One powder fire extinguisher (6 kg) with a protective casing and holder (± 15kg).
-
Electro-hydraulic unit ± 4 kW integrated in the gooseneck.
The unit is not suitable for continuous operation under full load and can only be used in conjunction with a permanently installed diesel power pack with integrated oil tank or with a separate oil tank. - Spiral cable for the the electric-hydraulic pump and/or electric winch (35 mm², 3.5 m length, max. 160 A) between the semi-trailer and the truck with socket (ANDERSON-ANDERSON).
- 3. lifting and lowering cylinder on the gooseneck to increase the active king pin load.( max38.4 T@ 62 km/h).
Powerpack-HA-1-EU-Std.
1 x Powerpack-HA-1-EU-Std.
1- cylinder Hatz-Diesel engine (silent pack) with electric starter and battery.
Performance: 9.5 kW (12.9 HP) at 3000 rpm
Exhaust classification: EU Stage V
Maximum hydraulic pressure: 280 bar
Maximum flow rate: 21l/min
Mounting on the gooseneck.
Hydraulic oil tank: 100 L
Frame hot-dip galvanized.
(± 480 kg)
Front Bogie
1 x 3-axles compact front bogie
Front and rear hook receiver.
Length: 3 560 mm
Chassis width: 2 850 mm
1 pair of lashing rings at the front (LC 10 600 daN).
1 pair of lashing rings at the rear, on the hook mount (LC 16 000 daN).
- On the front bogie, air connections for air pistol and air screw driver.
-
BEKA-MAX central lubrication for a 3 axle bogie with NLGI-2 normal grease.
(not connected to the steering rods). - A 7-pole socket left and right at the rear of the front bogie for the warning boards.
- 1 LED working lamp left and right at the rear on the front bogie with separate on/off switch.
- Surface of the front axle bogie painted with sand as anti-slip-coating.
-
Quick-release hydraulic couplings on the front bogie.
Without warranty on the seals. (± 4 kg)
Loading deck
Loading platform
1 x Lowbed
Lowbed with telescopic outer-beam in super-low design ATX-A with hook system in front and at rear with compression-joint and between the beams ± 50 mm hardwood cover.
Basic width: 2 850 mm
Length: 7 150 mm
Beam height: 330 mm
Beam width: 650 mm
Loading height 480 mm at 150 mm ground clearance.
1 pair of lashing rings lying on the front cross connection (LC 16 000 daN).
6 pairs of lashing rings foldable outwards (LC 10 000 daN).
1 pair of lashing rings lying on the rear cross-connection (LC 16 000 daN).
5 pairs of threat blocks M30 on the inner beam for mounting screwable rings.
- 2 wooden blocks 500 x 250 x 200 mm.
-
Preparation for the attachment of screwable container fittings for 1 x 20' or 1 x 30' container on the outer beams.
Without container fittings. - On the outside of the outer beams of the loading area, preparation for foldable outriggers.
- 1 pair of loose HeProLen drive-on wedges with cross-ribs 900 x 450 x 50/300 mm. (± 100 kg)
- 5 thread blocks M30 between the lashings rings under the upper flange on the outer beam for the fitting of screwable lashings rings (LC 12 000 daN).
- 2 pairs of screwable lashing rings M30 (LC 12 000 daN).
-
Foldable outriggers, 230 mm per side.
(Without timber) - Rimmed timber integrated in steel, loose. (± 350 kg)
- On the outerbeams painting with sand as anti-slip-coating.
- Delivery from a trailer to factory Lentzweiler.
Rear Bogie
1 x 5-axles rear bogie
Mechanical pin and lug coupling for mounting a lowbed at the front, end cross member at the rear
Bogie width: 2 850 mm
Bogie length: 6 840 mm
2 pairs of retractable lashing rings (LC 10 000 daN).
1 pair of retractable lashing rings (LC 5 000 daN).
3 pairs of cutouts in the border frame for hooking in tension belts (LC 2 000 daN)
3 pairs of lying lashing rings in the chassis (LC 10 600 daN).
- A 7-pole socket on the left and right, front and rear on the rear bogie for the warning boards.
-
BEKA-MAX central lubrication for a 5 axle bogie with NLGI-2 normal grease.
(not connected to the steering rods). - Socket for the cable remote control for the auxiliary steering on the rear bogie.
- Bogie with recess.
- 2 LED- reversing lights at the rear.
- Reflectors (red - yellow) according to the EU regulation at the rear of the trailer.
- A mud flap (www.MAX Trailer.eu) at the rear of the trailer.
- A LED flashing beacon with holder on the left and right side.
- U-beam between lowbed and rear axle bogie for ramps.
- Surface of the rear axle bogie painted with sand as anti-slip-coating.
- Recess on the rear axle bogie closed in front and rear with a screwed plate.
- Speed sticker 60 & 80 km/h at the rear.
- A reversible reflector with ‘CONVOI EXCEPTIONNEL, at the rear of the vehicle.
Accessories
1 x Accessories
- Yellow reflective tape according to the EU regulation over the entire length, on the extension and at the rear.
Request vehicle
We look forward to receiving your enquiry. We will respond as quickly as possible.
- Chassis number 110240
- Reference MAX710-Z-8(3+5)-V-30-ATX-A-7.15-(330)-19.5-1.36-2.85-PA
- Number of axles 8
- Condition New
- Year of manufacture 2025
- Colour Colour selectable
- Availability 02/2026
- Price On request
-
Location
SpecialTrailers24
Z.A.E.R. Op der Sang,
16, Op der Bréimicht
9779 Lentzweiler
Luxembourg - AdId 000187
- Steering Type Hydraulic
